|
|
|
|
Type : |
View
|
|
Gallons Per Minutes
: |
|
Total feet of
head : |
|
Casing Pressure: |
|
Operating Voltage
: |
|
Construction
: |
|
Enclosure : |
|
Connections : |
|
Assembly : |
|
Bell &
Gossett Series 60 |
The
series 60 flex coupled horizontal inline mounted pump is available
in 1" to 2" sizes. 1/4 to 3 HP at 1750 RPM in bronze fitted,
all bronze and all iron construction. Flows to 180 GPM, heads to
62 feet. The series 60 compact design facilitates direct horizontal
inline mounting. Ball bearing , flexible coupling pump design as
well as a rubber ring mounted motor provide for minimal noise level.
The combination of these features make it ideal for primary/secondary
applications. Used for applications with Hydronic heating and cooling
systems, general service and domestic water service. This model
can be installed to discharge up, down, left or right. If oiling
Lubricated the ports must always be in the twelve o'clock position
(on top) with the motor and bearing assembly in a horizontal position. |
|