Type :	Stamped Steel Pillow Block 2 Bolt Cast Pillow Block 2 Bolt Square Flange Block 4 Bolt Square Flange Block 3 Bolt Flange Bracket Unit Rubber Mounted Bearing Screw Conveyor Bearing Tapped Base Pillow Block Take-up Block Adapter Bearing With Retainer
Bore Sizes :	-- Select Bore Size -- .500 or 1/2" .5625 or 9/16" .625 or 5/8" .6875 or 11/16" .750 or 3/4" .8125 or 13/16" .875 or 7/8" .9375 or 15/16" 1.00 or 1" 1.0625 or 1-1/16" 1.125 or 1-1/8" 1.1875 or 1-3/16" 1.25 or 1-1/4" 1.3125 or 1-5/16" 1.375 or 1-3/8" 1.4375 or 1-7/16" 1.500 or 1-1/2" 1.5625 or 1-9/16" 1.625 or 1-5/8" 1.6875 or 1-11/16" 1.750 or 1-3/4" 1.8125 or 1-13/16" 1.875 or 1-7/8" 1.9375 or 1-15/16" 2.00 or 2" 2.0625 or 2-1/16" 2.125 or 2-1/8" 2.1875 or 2-3/16" 2.250 or 2-1/4" 2.3125 or 2-5/16" 2.375 or 2-3/8" 2.4375 or 2-7/16" 2.625 or 2-5/8" 2.6875 or 2-11/16" 2.750 or 2-3/4" 2.8125 or 2-13/16" 2.875 or 2-7/8" 2.9375 or 2-15/16" 3.00 or 3" 3.1875 or 3-3/16" 3.4375 or 3-7/16" 3.50 or 3-1/2" 3.937 or 3-15/16"
		Cast Pillow Block
The most popular mounted units are pillow blocks, and they provide an integral unit to support shafts parallel to the mounting surface. The cast base has elongated holes for mounting bolts to provide interchangeability with other competitive makes as well as ease of adjustment during installation. Self-aligning pillow block assemblies usually do not require shimming at the base because self-aligning of the bearing within the housing permits enough adjustment.